3rd Joint IAEA-ITER Technical Meeting on
"ITER Materials and Technologies"

16-18 November 2015
IAEA Headquarter, Vienna, Austria

Session 1: Materials for Divertor and First wall components

Chair: T. Hirai/ S. Wikman


Go back                                                                                                        Go forward
Monday, 16th November
Time
Sessions
Author
Topic
Abstract
11.30
K3
T. Hirai
ITER W ITER W Divertor Design and Manufacturing challenges
12.20
O1
S. Panayotis
Thermo-mechanical analysis of ITER Divertor Tungsten Monoblocks under High Heat Flux Loadings
12:45
Lunch
14.00
O2
M. Wirtz
Assessment of Material Properties of Tungsten as Plasma Facing Material
14.25
O3
D. Riley
Mechanisms of Tungsten Degradation Within Divertor Components
14.50
O4
I. Garkusha
Damage Features of Castellated Targets Caused by Powerful Plasma Impacts in ITER Divertor
15.15
O5
S. Petschanyi
Importance of shielding effect for Divertor targets lifetime in ITER
15.40
O6
G. Kalinin
Influence of Heat-Treatment on the Physical and Mechanical Properties of Chromium-Zirconium Bronze
16.05
Coffee Break
16.35
O7
S. Wikman
Assessment of additive manufacturing of 316L(N)-IG for In-Vessel components and performance of CuCrZr at coolant water interfaces